StormWall Releases StormWall Appliance for On-Premises DDoS Protection
StormWall has launched StormWall Appliance, a software solution designed to filter DDoS attacks directly within a customer's infrastructure instead of sending network traffic to an external cloud.
The product is installed on the company's own servers, ensuring that traffic never leaves the internal perimeter. This approach targets banks, hosting providers, internet service providers, and other organizations that demand high infrastructure availability and strict control over their data.
StormWall Appliance can function in fully isolated networks without internet access thanks to offline licensing that uses a hardware key. It filters attacks at OSI layers L3–L5, covering volumetric floods, attacks on the TCP stack, reflection and amplification schemes, DNS attacks, and gaming protocols.
The solution also claims to process attacks in TLS and QUIC traffic without decrypting it. Packets are handled using DPDK and StormWall's proprietary algorithms.
Customers can deploy the product on its own or combine it with the company's cloud platform. In hybrid scenarios, the on-premises system stops network-level attacks inside the perimeter while the cloud layer adds protection for applications at L7.
According to the vendor, deployment takes as little as one day. After installation, organizations receive a free 30-day trial period. Pricing is not publicly disclosed and depends on active port capacity, number of installations, and other factors. Both perpetual and subscription licenses are available, along with three tiers of technical support. The highest tier includes 24/7 rule tuning, attack mitigation, and incident analysis by the company's monitoring center.
StormWall states that the release responds to demand from Russian customers who either require more than cloud-based protection or cannot route traffic outside their own networks.
Related articles
Home Lab Overhaul: Securing Proxmox Infrastructure After Discovering 63,000 Forgejo Spam Accounts
A home lab administrator migrated Docker stacks to new LXC containers on Proxmox and uncovered multiple security misconfigurations. The setup relied on Cloudflare proxying, MikroTik port forwarding to NPMplus with CrowdSec, and Cloudflare Tunnels for admin panels. After fixing IP address logging in the WAF, logs revealed 63,021 spam accounts created on a Forgejo instance that had open registration. The operator disabled registrations, recreated the instance from verified Git mirrors, and eliminated direct internet exposure by routing all traffic through Cloudflare Tunnel. Additional controls included Zero Trust policies, device enrollment restrictions, and TOTP on Guacamole. The changes removed open ports, enforced proper client IP visibility for CrowdSec, and segmented public, limited, and admin access paths.
Benchmarking AES-GCM and Ascon AEAD Performance on ESP32 and ESP8266 for Industrial Telemetry
Researchers conducted detailed experiments measuring the real-world costs of three AEAD implementations on ESP32 and ESP8266 microcontrollers used in industrial telemetry scenarios. The study compared mbedTLS AES-128-GCM, legacy Ascon-128 via CryptoLW, and a portable C++ port of NIST Ascon-AEAD128 across three load profiles ranging from stable low-frequency packets to maximum-rate 10 ms intervals. Key metrics included AEAD execution time, CPU cycles, memory usage, UDP transmission success rates, and power consumption captured via TC66C. Initial tests revealed significant UDP packet loss on ESP32 under MAX load due to ENOMEM and ENOBUFS errors in the lwIP stack, which were largely resolved after network handling improvements. Results showed AES-GCM completing in roughly 618 µs on ESP32 versus 803 µs for legacy Ascon-128, while the reverse held on the slower ESP8266 where legacy Ascon outperformed AES by a factor of approximately 3.5. The work highlights that network stack limitations often dominate over cryptographic overhead in high-throughput industrial sensor deployments.
ARinteg Earns Golden Partner Status from Ideco for NGFW Security Projects
ARinteg has been awarded Golden Partner status by Ideco following successful joint projects in network security. The integrator supplies and implements the Ideco NGFW Novum next-generation firewall for perimeter protection and secure remote access. Collaboration also covers customer migrations from foreign NGFW solutions to the Russian vendor’s product. Commercial Director Dmitry Slobodenyuk stated the new status will allow ARinteg to deliver fuller support across all implementation stages. Ideco’s Partner Relations Head Sergey Markin highlighted ARinteg’s technical expertise in large-scale deployments. The partnership supports import substitution and hybrid infrastructure requirements.
Zero Trust in Practice: Avoiding YAML Pitfalls with Kubernetes NetworkPolicy and Istio
A detailed case study demonstrates how a single misplaced hyphen in a Kubernetes NetworkPolicy YAML file can unintentionally grant cluster-wide access instead of restricting it to a single client Pod. The example uses a shop namespace API connecting to an orders service in the backend namespace over TCP/8080, showing the correct use of namespaceSelector and podSelector together within the same from element. Tests on K3s with four vCPU and 4 GB RAM confirmed that only the intended client succeeds while others receive Connection refused. The implementation then extends to Istio with PeerAuthentication in STRICT mode and an AuthorizationPolicy limiting requests to GET /orders/* from the orders-api ServiceAccount. Additional checks cover RBAC permissions for creating Pods with specific ServiceAccounts and the need to verify DNS routes and existing allow-all policies. The article stresses maintaining an explicit list of required connections, testing both success and denial cases, and preserving rollback manifests before applying changes in production.