Bureau 1440 Unveils Satellite Internet Terminals Reaching 700 Mbps for Industrial and Rail Use
Bureau 1440 has introduced three satellite internet terminal variants at the Digital Solutions forum, targeting different use cases from industrial sites to high-speed rail and portable operations.
The flagship 1440 ULTRA model claims peak speeds of up to 700 Mbit/s. It is intended for remote territories, enterprises, and infrastructure objects and can function both as a fixed installation and while moving. The production version keeps the same 600×600 mm footprint as earlier prototypes but is 30 percent lighter. It also carries an IP67 rating for protection against dust and brief water immersion, making it suitable for construction sites or exposed locations.
The 1440 ZEMLYA railway-specific terminal is already being tested on RZD trains. It is engineered to maintain connectivity at speeds up to 400 km/h and is positioned for use on Lastochka and Sapsan services. The goal is to deliver continuous internet access for passengers and crew on routes that lack terrestrial coverage.
A third device, the 1440 MINI, remains a concept at this stage. Measuring 300×300 mm, it targets roughly 100 Mbit/s and is envisioned as a portable solution for rescue services, emergency teams, and field expeditions. Production timelines for the MINI have not been disclosed.
The company is advancing ground equipment in parallel with its low-orbit satellite constellation. Pilot connections are already running on rail lines and in isolated settlements. However, Bureau 1440 stressed that terminals are not sold through distributors and that advertised maximum speeds do not guarantee identical performance for every user under all conditions. Separate announcements will be made when sales begin.
Related articles
Home Lab Overhaul: Securing Proxmox Infrastructure After Discovering 63,000 Forgejo Spam Accounts
A home lab administrator migrated Docker stacks to new LXC containers on Proxmox and uncovered multiple security misconfigurations. The setup relied on Cloudflare proxying, MikroTik port forwarding to NPMplus with CrowdSec, and Cloudflare Tunnels for admin panels. After fixing IP address logging in the WAF, logs revealed 63,021 spam accounts created on a Forgejo instance that had open registration. The operator disabled registrations, recreated the instance from verified Git mirrors, and eliminated direct internet exposure by routing all traffic through Cloudflare Tunnel. Additional controls included Zero Trust policies, device enrollment restrictions, and TOTP on Guacamole. The changes removed open ports, enforced proper client IP visibility for CrowdSec, and segmented public, limited, and admin access paths.
Benchmarking AES-GCM and Ascon AEAD Performance on ESP32 and ESP8266 for Industrial Telemetry
Researchers conducted detailed experiments measuring the real-world costs of three AEAD implementations on ESP32 and ESP8266 microcontrollers used in industrial telemetry scenarios. The study compared mbedTLS AES-128-GCM, legacy Ascon-128 via CryptoLW, and a portable C++ port of NIST Ascon-AEAD128 across three load profiles ranging from stable low-frequency packets to maximum-rate 10 ms intervals. Key metrics included AEAD execution time, CPU cycles, memory usage, UDP transmission success rates, and power consumption captured via TC66C. Initial tests revealed significant UDP packet loss on ESP32 under MAX load due to ENOMEM and ENOBUFS errors in the lwIP stack, which were largely resolved after network handling improvements. Results showed AES-GCM completing in roughly 618 µs on ESP32 versus 803 µs for legacy Ascon-128, while the reverse held on the slower ESP8266 where legacy Ascon outperformed AES by a factor of approximately 3.5. The work highlights that network stack limitations often dominate over cryptographic overhead in high-throughput industrial sensor deployments.
ARinteg Earns Golden Partner Status from Ideco for NGFW Security Projects
ARinteg has been awarded Golden Partner status by Ideco following successful joint projects in network security. The integrator supplies and implements the Ideco NGFW Novum next-generation firewall for perimeter protection and secure remote access. Collaboration also covers customer migrations from foreign NGFW solutions to the Russian vendor’s product. Commercial Director Dmitry Slobodenyuk stated the new status will allow ARinteg to deliver fuller support across all implementation stages. Ideco’s Partner Relations Head Sergey Markin highlighted ARinteg’s technical expertise in large-scale deployments. The partnership supports import substitution and hybrid infrastructure requirements.
Zero Trust in Practice: Avoiding YAML Pitfalls with Kubernetes NetworkPolicy and Istio
A detailed case study demonstrates how a single misplaced hyphen in a Kubernetes NetworkPolicy YAML file can unintentionally grant cluster-wide access instead of restricting it to a single client Pod. The example uses a shop namespace API connecting to an orders service in the backend namespace over TCP/8080, showing the correct use of namespaceSelector and podSelector together within the same from element. Tests on K3s with four vCPU and 4 GB RAM confirmed that only the intended client succeeds while others receive Connection refused. The implementation then extends to Istio with PeerAuthentication in STRICT mode and an AuthorizationPolicy limiting requests to GET /orders/* from the orders-api ServiceAccount. Additional checks cover RBAC permissions for creating Pods with specific ServiceAccounts and the need to verify DNS routes and existing allow-all policies. The article stresses maintaining an explicit list of required connections, testing both success and denial cases, and preserving rollback manifests before applying changes in production.